JET SET II/ROUND
ROTATING MAT CASE
18” or 20” Rotating Mat Case
16” Square Rotating Mat Case
ByAnnie/Kathy Lambach
PLEASE READ ALL CLASS PREP
INSTRUCTIONS
You will need to purchase the ByAnnie pattern, Jet Set II. We will be using both the Jet Set II pattern and my modified
pattern to construct the Round Rotating Mat Case.
The main parts of the case will be constructed from quilted fabric. When choosing fabric for your case take the
following into consideration.
·
You will need 3 quilted rectangles (Quilt Set A)
that will be cut into circles for the case front, case back & front outer
pocket. The front outer pocket will cover most of the case front.
·
Quilt the rectangles by layering main
fabric/Soft & Stable/lining fabric for the 3 pieces. Consider using a different fabric for the
outside front pocket to make the pocket stand out. (See my class sample) You
might want to fussy cut or do some special quilting to accent that front outer
pocket. Or use lining fabric for case front.
Just something to make your pocket special. ??
You will have 3 Quilt Sets A that measure 22”x24”. This size is easier to quilt on your domestic
sewing machine. The Quilted Sets can
also be quilted on a long arm. Just use
yardage instead of cutting the rectangles.
·
You will also need to quilt a rectangle for the
zipper strip and side strip.
·
Follow pattern instructions for General
Quilting. (2” or less crosshatch
quilting makes a nice bag.)
·
You must have your fabric quilted BEFORE class. There will not be time to quilt fabric in
class.
·
DO NOT CUT QUILTED BAG PIECES BEFORE CLASS. I have templates that will make the cutting
accurate.
·
Please cut all NON-quilted pieces before class.
·
Bring your round rotating mat with you to class
to see which size fits your mat (18” or 20”)
SUPPLIES NEEDED for Both Cases
Fabric
yardage is based on 42” WOF
·
Main Fabric – 2 yards
·
Lining Fabric – 2 yards
·
Coordinating Fabric – 1 yard
·
ByAnnie’s Soft and Stable – 1 package of 72”x58”
(SS2072)
·
Mesh Fabric – 21”x21” (This mesh will be cut
into two pieces for your inside pocket (See cutting instructions.) ByAnnie’s
packaged mesh measures 18”x54” and will work for your case)
·
Handbag Zippers – One 24” zipper and One 60”
zipper. Zippers by the yard are most
cost effective.
·
Hardware –
1” D-Rings or triangle rings – 2
1” Swivel hooks – 2
1” wide-mouth slider – 1
·
1” Strapping – 2 ¼ yards
1.
CUT AND QUILT FOR
CLASS – The first set of dimensions are for the 18” case. The second set of dimensions are for the 20”
case. The third set of dimensions are
for the square case. If there is only
one set of dimensions, it is for all three sizes.
A.
Cut
From Main Fabric Cut: (To Be
Quilted)
·
Quilted Sets A Main (case front, back &
outer pocket) – 3 rectangles - 22”x 24”
·
Quilted Set B Main (zipper and side strips) –
Cut 2 - 8”x WOF, sew short ends together with a ½” seam allowance, press seams
open, then sub cut to 8” x 64”
·
For Square case ONLY – 12” x 8”
From Lining Fabric Cut: (To Be Quilted)
·
Quilted Sets A Lining (case front, back &
outer pocket) – 3 rectangles - 22”x 24”
·
Quilted Set B Lining (zipper and side strips) –
Cut 2 - 8”x WOF, sew short ends together with a ½” seam allowance, press seams
open, then sub cut to 8” x 6”
·
For Square case ONLY – 12” x 8”
From ByAnnie’s Soft & Stable
Cut: (To Be Quilted)
·
Quilted Sets A Stabilizer (case front, back
& outer pocket) – 3 rectangles - 22”x 24”
·
Quilted Set B Stabilizer (zipper and side
strips) – 8”x 64” Note: Soft & Stable can be joined together using Fusible
Batting Tape. Do not sew together.
·
For Square case ONLY – 12” x 8”
For all the remaining pieces cut
the following:
From coordinating Fabric Cut:
·
Carrying Strap – 2 ¾”x 42” and 2 ¾”x 22”
·
Handle – 2 ¾”x 15”
·
Bias Binding – 2 strips at least 65” each
(for square you will need 2 strips of 75”)
·
Pocket B (Inside Mesh Pocket) Bindings – two 2” x
20” (2” x 22”) (2” x 18”)
·
Pocket A (Outside Front Pocket) Binding – One
2”x 20” (2”x 22”) (2” x 18”)
·
Zipper Pulls – three 1”x 12” (Optional)
·
Side Strip Bindings – two 2”x 6”
From Mesh Fabric Cut:
·
Pocket B1 – 4”x 19” (5” x 21”) (3 ½” x 18”)
·
Pocket B2 – 15” x 19” (16” x 21”) (14 ½” x 18”)
From 1” Strapping Cut: (to
stabilize carrying strap and handle)
·
Carrying Strap Stabilizer – 62”
·
Handle Strap Stabilizer – 14”
Zippers – Zippers by the yard are
most cost effective. DO
NOT CUT zippers until class.
·
Outside Front Pocket zipper – 24”
·
Case zipper – 60”
After cutting your all fabric requirements,
bring your extra fabric to class just in case you have an “oops” that needs
corrected. ??
